Helmet Holder; Side Covers - Honda XL200 Manual Del Propietário

Owner´s Manual

Helmet Holder

The helmet holder (1) is on the left side of the rear
fender. The helmet holder is designed to secure your
helmet while parked.
Insert the ignition key (2) and turn it counterclockwise
to unlock.
Hang your helmet on the holder pin (3) and push it in
to lock. Remove the key.
(2) (1)
(3)
WARNING
!
Riding with a helmet attached to the holder can
interfere with the rear wheel or suspension and
could cause a crash in which you can be seriously
hurt or killed.
Use the helmet holder only while parked. Do not ride
with a helmet secured by the holder.
(1) Helmet holder
(2) Ignition key
(3) Holder pin

Side Covers

The right side cover must be removed for battery and
fuse maintenance.
The left side cover must be removed for air cleaner
maintenance.
Removal
1. Remove the bolt (1).
2. Pull out the side cover (2).
Installation
• Installation can be done in the reverse order of
removal.
(2)
(1) Bolt
(2) Side cover
(1)
31