Helmet Holder - Honda CBF1000/A Manual Del Propietário

HELMET HOLDER

The helmet holder is located below the seat.
Remove the pillion seat (see page 50). Route
either end of the helmet holder cable (1)
through the helmet's D-ring (2).
Hook the loops of the wire onto the helmet
holder (3) and lower the seat to lock.
The helmet holder wire is furnished in the tool
kit.Remove the helmet wire and store it in the
tool bag when it is not used.
n WARNING
Riding with a helmet attached to the holder
can interfere with the rear wheel or
suspension and could cause a crash in
which you can be seriously hurt or killed.
Use the helmet holder only while parked.
Do not ride with a helmet secured by the
holder.
(3)
(1) Helmet holder cable
(2) D-ring
(3) Helmet holder
(1)
(2)
49