Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Table Saw Operation
SAFETY POWER SWITCH
NOTE: This table saw has a safety feature that
helps prevent accidental starting.
To turn saw on: lift switch lever by pinching side
walls and pulling up. This action startsthe saw (Fig.30)
To turn off power: push switch lever down to its
original position (Fig. 31).
To prevent unauthorized use, the switch can accom-
modate a padlock with a long, 3/16" or 1/4" diameter
shackle (not provided with table saw), (Fig. 31).
SMART GUARD SYSTEM
The Bosch
Smart Guard
has been designed
for
modularity,
enabling
the use of multiple
combina-
tions of the three main components
- Main barrier
guards, Anti-kickback
device, and riving knife. Ad-
ditionally, the riving knife can be quickly adjusted
to
three positions (high, middle, and stored), depending
on the application
requirement.
COMPONENT
PARTS (FIGURE 32):
O Riving
Knife
The Riving
Knife is the central
element
of the
Bosch
Smart
Guard
blade
guarding
system,
serving as the attachment
point for both the Main
Barrier Guard and the Anti-Kickback
Device. In
the event that the Main Barrier Guard and Anti-
Kickback Device are removed, the Riving Knife
maintains its functionality as material splitter, and
is adjustable
to three positions.
Because of this
adjustability,
the Riving Knife can be appropri-
ately positioned
for all cutting applications.
0
Main Barrier Guard
The main guard is comprised
of a pair of plastic
barriers
attached
to the metal
upper
barrier
guard. The side barriers (one to the left and one
to the right of the blade) operate independently
of one another, maintaining maximum blade cov-
erage during cutting operations.
The main guard
incorporates a quick-connect
attachment
point
and can be attached or removed from the blade
guarding
system independent
of the Anti-Kick-
back Device and Riving Knife.
Note: To best secure the main guard for relocation,
adjust the blade to its lowest position. This keeps the
guard tight to the table surface and prevents dam-
age related to the guard swinging during relocation.
If transporting
over a longer distance on/off the job,
place guard in it's below table storage position. (See
figure 33, on page 23).
r.a a
•
Anti-Kickback
Device
In the event of kickback,
the Anti-Kickback
De-
vice, (also known as dogs, or pawls) is intended
to help prevent the board from being thrown in
the direction of the user. The sharp teeth of the
pawls are intended to "catch" the material in the
event of kickback.
ATTACHMENT/REMOVAL
(see pages 12 & 13 for detailed
instructions)
The three primary components
of the Smart Guard
blade guarding
system
are designed
for rapid at-
tachment,
adjustment,
and/or removal without the
need for additional tools.
-22-
Publicidad
Tabla de contenido
