Sts Features - Sigma BC 14.12 ALTI Manual De Instrucciones

2. Functions / Properties
– Calibration using the current altitude
altitude is the altitude of the place at which you are
currently located irrespective of your start altitude
(your trip start location, a mountain hut, or other
locations). The current altitude is used if you are
out on your bike and altitude information is provided.

2.4 STS features

The current

– Synchronization
– 1.
– 2.
1
Attach the BC 14.12 STS ALTI

to the bracket – zeros flash for the speed.
There are two ways of synchronizing the speed:
Start cycling – the receiver usually

synchronizes with the transmitter after 3-4 wheel
rotations.
Spin the front wheel until the speed values

stop flashing.
Removing the BC 14.12 STS ALTI from the bracket
severs the connection.
2
19