GETTING STARTED
16
EN
Language Settings
The language on the display can be changed.
(
pg. 29, 31)
1
Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch.
2
Open the LCD monitor fully. (
3
Set the recording mode to "
4
Press MENU. The Menu Screen appears.
5
Press 3, 4, 2 or 1 to
select "DISPLAY", and
press SET. The DISPLAY
Menu appears.
6
Press 3, 4, 2 or 1 to
select "LANGUAGE", and
press SET.
7
Press 3 or 4 to select
the desired language, and
press SET or 2.
● Press 1 whenever you
want to return to the
previous menu screen.
8
Press MENU. The
Menu Screen closes.
pg. 19)
M
".(
pg. 15)
LANGUAGE
D I S PLAY
BR I GHT
CL OCK AD J .
LANGUAGE
ENGL I SH
FRANÇA I S
DA T E / T I ME
ON SCREE N
ESPAÑOL
T I ME COD E
PORT U GUÊS
DEMO MOD E
Date/Time Settings
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (
1
Perform steps 1 – 5 in "Language Settings"
(on the left column)
2
Press 3, 4, 2 or
and press SET. The date display format is
highlighted.
3
Press 3 or 4 to select the desired date
display format, then press SET or 2. Select from
"MONTH.DATE.YEAR", "DATE.MONTH.YEAR"
or "YEAR.MONTH.DATE".
4
Press 3 or 4 to select the time display
format, then press SET or 2. Select from "24h"
or "12h".
5
Set the year, month, date, hour and minute.
Press 3 or 4 to select the value, then press SET
or 2. Repeat this step until you have input all the
settings.
NOTE:
Press 1 to return to the previous setting.
6
Press
.The Menu
MENU
screen closes.
Grip Adjustment
1
Adjust the velcro strip.
● Before making the
adjustment, remove any
security tags that may be
attached to the velcro.
2
Pass your right hand
through the loop and grasp
the grip.
3
Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop Button, Power Switch and
Power Zoom Lever. Be sure to fasten the velcro
strip to your preference.
pg. 31, 32)
to select "CLOCK ADJ.",
1
CLOCK ADJ .
M NTH
O
.
DATE YEAR
.
DEC
.
0
6 2 006
.
0 : 05
7
1 2h
AM