Connection To A Personal Computer - JVC GR-D370U Manual De Instrucciones

Connection To A Personal Computer

[A] Using USB cable
To USB
Core filter
USB cable
(provided)
To USB
connector
PC with DV connector
PC
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
●
Connect the DV cable first to the PC, and then
to the camcorder.
●
Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[B] Using DV cable
OR
To DV IN/OUT
Core filter
DV cable
(optional)
Core filter
To DV connector
[A] Using USB cable
It is possible to transfer still images stored on a
memory card to a PC.
[B] Using DV cable
It is also possible to transfer still/moving images
to a PC with a DV connector by using the
provided software, software equipped with the
PC or commercially available software.
If you are using a Windows
®
Windows Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
®
Windows Messenger.
NOTES:
●
Refer to "SOFTWARE INSTALLATION AND PC
CONNECTION GUIDE" for the bundled software
and drivers.
●
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 14)
●
Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.
●
When using a DV cable, be sure to use the
optional VC-VDV204U or VC-VDV206U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
●
If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
●
The date/time information cannot be captured into
the PC.
●
Refer to the instruction manuals of the PC and
Software.
●
The still images can also be transferred to a PC
with a DV connector-equipped capture board.
●
The system may not work properly depending on
the PC or capture board you are using.
"
"USB" and/or
LCD monitor while the PC is accessing data in
the camcorder or the camcorder is
transferring a file to the PC.
NEVER disconnect the USB cable while
" " is displayed on the LCD
monitor since this can result in product
damage.
EDITING
41
EN
®
XP, you can use
"
appears on the