EN
Technical data
Model
Type
Min. rpm
Max. rpm
Displacement
Rotation
Power
Weight
Declaration Of Incorporation
The following Declaration applies when the engine is separately sold.
1. The undersigned, Emak spa – Via Fermi, 4 – 42011 Bagnolo in Piano (RE) Italy,
2. declares under its own responsability that the Almost-Machine:
3. Type: ENGINE
4. Trademark: / Type: EMAK K 1250
5. Serial identification: T36100 XXXX 0000001 ÷ T36100 XXXX 9999999
6. complies with the requirements established by Directive 2006/42/EC, since the safety requirements at
Annex VII B, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, and 1.7 by the Annex 1 have been applied and respected.
7. complies with the requirements established by the Directive 2014/30/EU and by the Regulations (EU)
2016/1628, (EU) 2017/654 and (EU) 2017/656 as well.
8. Commits to give further information regarding the subject engine if required by the national
authorities.
9. declares that EMAK engines doesn't have to be put in service until the final machine where it is
assembled is declared in compliance with the requirements of 2006/42/EC Directive and the national
provisions under the EXCLUSIVE AND TOTAL RESPONSIBILITY OF THE MANUFACTURER OF THE FINAL
MACHINE.
10. Technical documentation available by the administrative headquorter, technical dept.
11. Made at Bagnolo in Piano (RE) Italy – Via Fermi,4
12. Date 20/10/2018
Instructions for the assembly
For the correct assembly of the quasi-machine EMAK Engine in the final machine, following terms have
to be met:
No Engine component has to be replaced, modified, tampered or removed.
The final machine, where the EMAK engine is assembled, has not to exceed the foreseen engine speed
indicated by the manufacturer.
During the assembly of the engine in the final machine, the correct alignment of the rotating components
must be guaranteed; the engine assembly in the final machine or the maintenance operations must never
damage the engine or cause unforeseen efforts .
The final machine must be equipped with the necessary instructions for a correct engine use.
The engine working in safety is guaranteed only under maintenance presence, carried out by specialized
workshops, using original spare-parts.
K 1250 ADV
EMAK single cylinder, 4-stroke, ADV
1800 rpm
3350 rpm
414 cc
Anti-clockwise (from P. T. O. side)
8,6 KW
31 Kg
Fausto Bellamico - President