Menu Classifications
PICTURE ADJ. (Picture adjustment): See page 16.
CONTRAST
BRIGHT
CHROMA*
1
PHASE*
2
SHARPNESS
sub menu
reset
SIZE/POSITION ADJ. : See page 17.
H.SIZE
H. POSITION
V. SIZE
V.POSITION
CLOCK PHASE*
3
sub menu
reset
FUNCTION SELECT: See pages 19 to 23.
COLOR TEMP.
PICTURE MODE*
4
ASPECT*
5
SIGNAL MODE*
6
RGB/COMPO.*
7
reset
*
1
Adjustable when viewing the NTSC, PAL or SECAM signal or component signal.
2
*
Adjustable when viewing the NTSC signal or component signal.
*
3
Adjustable when RGB A or RGB B input is selected.
4
*
Adjustable when the RGB15K-50, RGB15K-60, or VGA480-60 signal comes in.
*
5
Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.
6
*
Not adjustable when viewing the following component signals—720p, and 1080i (1035i).
*
7
Adjustable when RGB B or COMPONENT input is selected.
32
(Continued)
Adjusts the contrast of the picture.
Adjusts the brightness of the picture.
Adjusts the color density of the picture.
Adjusts the color phase.
Adjusts the outlines of the picture.
Displays the fine adjustment bar.
Resets the Picture Adjustment Menu settings to defaults.
Adjusts the horizontal screen size.
Adjusts the horizontal screen position.
Adjusts the vertical screen size.
Adjusts the vertical screen position.
Adjusts to eliminate stripes or flickering.
Normally, no adjustment is needed.
Displays the fine adjustment bar.
Resets Size/position Adjustment Menu settings to defaults.
Adjusts the color temperature.
Use when the picture is reddish or bluish.
Selects the picture quality suited to either the still picture or the moving picture.
Selects the horizontal to vertical ratio of the screen.
• Selects a color system (NTSC, PAL, SECAM, NTSC 4.43, PAL60) when VIDEO A or VIDEO B
input is selected.
• Selects a scan system—480i, 576i, 480p, 720p, 1080i (1035i)—when COMPONENT input is
selected. Normally, set to "AUTO."
Selects the usage of the COMPONENT/RGB B terminals either as the COMPONENT input
terminal or as the RGB B input terminal.
Resets the Function Selection Menu settings to defaults.