Setting The Remote-Controllable Input - JVC GM-P420E Manual De Instrucciones

Other Convenient Functions
5 /
2 / 3
DISPLAY ASPECT
VIDEO A
MUTING
VOLUME –
MENU/EXIT
MENU/EXIT
RM-C576 REMOTE CONTROL UNIT
1
* For GM-P420PCE and GM-P421PCE:
"REMOTE SWITCH" does not appear on the menu
unless the video input unit (IF-C422P1G) is
separately purchased and installed.
26
MENU INPUT POWER
MENU INPUT POWER
MENU
POWER
VIDEO B COMPO.
RGB A
RGB B
VOLUME
2 / 3
5 /
(Continued)
2
Press 5/∞ to move the cursor (3) to
"CONTROL LOCK."
• The Setup Menu consists of two pages. If you keep
pressing 5/∞, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the Control Lock
function alternates between "ON" and "OFF."
To cancel the Control Lock function, select "OFF."
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Note:
• Even when the Control Lock function is in use, the
following operations are possible:
– Operation to cancel the Control Lock function
– All operations from the remote control

Setting the Remote-Controllable Input

When connecting the external control unit to the REMOTE
MAKE terminal, you need to set the desired input to use,
which you can select from the connected external control unit.
• For GM-P420PCE and GM-P421PCE: You cannot use this
function unless the video input unit (IF-C422P1G) is
separately purchased and installed.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
S E T - U P M E N U
Cursor (3)
S T A T U S D I S P L A Y
C O N T R O L L O C K
R E M O T E S W I T C H
H D S I G N A L M O D E
W H I T E B A L A N C E
A D J U S T :
2
Press 5/∞ to move the cursor (3) to
"REMOTE SWITCH."
• The Setup Menu consists of two pages. If you keep
pressing 5/∞, you can move to the other page from
the current page.
1 / 2
: O F F
: O F F
1
: M O D E 1 *
: 1 0 8 0 i
S E L E C T : E X I T : M E N U