Installation Procedure; Installing The Heat Shield - Gaggenau VI 263 620 Instrucciones De Instalación

en-us

Installation Procedure

A minimum clearance between the rear of the
▯
cupboard and the kitchen wall, and between the
surface of the worktop and the upper area of the
drawer.
An opening at the top to the rear of the cupboard.
▯
If the minimum clearance of
▯
provided at the rear of the cupboard, you must create
an opening on the underside.
Note: If the appliance is installed in an island unit or
another installation that is not described here, you must
ensure that the cooktop is sufficiently ventilated.
8
13 / inch (20 mm) is not
16
Installation Procedure
9
CAUTION
I n s t a l l a t i o n P r o c e d u r e
Sharp edges. Use protective gloves when installing
the cooktop.
Note: The appliance is heavy. It is advisable to install it
with a second person.

Installing the heat shield

9
CAUTION
Sharp edges. Use protective gloves when installing
the plate.
For safety reasons, the heat shield must be properly
installed. This prevents components from overheating as
a result of the recirculation of hot air from the cooktop.
The heat shield is the same width as the cooktop. For
shipping, it is screwed to the burner box.
After unpacking the cooktop, unscrew the heat shield.