SB 52, 102, 152, 202, 302, 452, 552
Storage
WARNING Falling breaker can cause injuries
Place the hydraulic breaker in a safe position
►
where it cannot fall over and cause damage.
If the hydraulic breaker is not used for a long time,
the following points have to be considered to protect
the hydraulic breaker from corrosion:
1. Clean the hydraulic breaker carefully.
2. Dismount the working tool and lubricate the front
part of the piston, bushing and the tool retainer
lock.
3. Store the hydraulic breaker in a dry place.
Disposal
A used machine must be treated and scrapped in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible.
Before a used machine is scrapped it must be
emptied and cleaned from all hydraulic oil. Remaining
hydraulic oil must be deposited and any negative
influence on the environment is to be kept as low as
possible.
© 2008 Atlas Copco Construction Tools AB | No. 9800 0648 90e | 2008-11-03
Safety and operating instructions
21