IKUSI TM70 Serie Manual De Instalación Y De Utilización página 180

JUMPERS CONFIGURATION
Size ¼ of LR72
TM70Bi V4.1 (03/12) 1121174.pdf
IKUSI reserves the right to modify this information without prior notification.
Connections with the LR72
P5: "Jumper" for configuration of the
CAN direction of the expansion.
"Jumper" = ON  "1" logic.
Programmable addresses: 1...63
max
P6: "Jumper" to enable or disable the
Tele-Alignment process.
Enabled Tele-Alignment = "jumper"
placed or ON.
P6
Disabled Tele-Alignment = "jumper"
eliminated or OFF.
P6
1 = VPP (channel power)
2 = GND (Channel ground)
3 = VO (DIRECT analogue PWM output)
4 = VR (INVERSE analogue PWM output)
70