Medela The SNS 00901S Instrucciones De Uso página 10

2. Home Use
BOIL
WASH
RINSE
AIR-DRY
8
Prior to first use:
1. Wash and rinse parts.
2. Place parts in a 4- to 5-quart saucepan.
3. Fill to within 1 inch of rim with
cold water.
4. Cover and boil for 20 minutes.
5. Drain water off, allow parts to cool in
open pan.
6. Remove all parts and allow to air-dry.
After each use:
1. Fill SNS full of warm soapy water, replace
attachment ring and tubing and force
water through tubing.
2. Refill with clean water and again force
water through tubing.
3. Squeeze the empty bottle a few times to
remove water droplets from the tubings.
4. Completely disassemble and clean
remaining parts with soapy water.
5. Rinse well and drain dry on a clean towel.
6. Reassemble.
7. It is not necessary to boil parts after
each feeding unless your health care
professional specifically directs you to
do so.
8. If you find mineral deposits building up,
try rinsing with vinegar and then thor-
oughly rinsing out. Alternatively, you
can boil with distilled water only.