Getting Started - Medela The SNS 00901S Instrucciones De Uso

GETTING STARTED

Before using the SNS, it may help if you get acquainted
with the device. Practice assembling and disassembling
your SNS as this will give you familiarity with the system.
Connect proper sized tub-
1 1
ing (see Tubing Size).
Generally, the middle size
will be most appropriate.
The smaller size is used
for a slower flow or a thin-
ner fluid. Consult with
your health care profes-
sional for your proper size.
Push valve with attached
2 2
tubings over valve holder.
Caution: Do not pull on
tubing. Tubings are not
very strong and could break.
Slide tubing
3 3
attachment ring and push
valve holder with the valve
into the ring until it snaps.
Fill bottle with supplement
4 4
recommended by physician.
There is normally no need to warm the supplement.
The tubing is very thin. Your body will heat the sup-
plement as it passes through the tubing because the
tubing is close to your skin. When taken from the
4
through