De-Activation; Setting The Clock - Caso M20 Manual De Instrucciones

15.7 De-activation:

15.8 Setting the clock

caso M20
In order to interrupt an ongoing cooking programme, you can
proceed as follows:
• Pres the Stop button once. The cooking programme that is
in use will be stopped.
• Open the door of the device. The cooking programme that
is in use will be stopped.
Please note
► To continue the interrupted cooking program, press the
button Start/Quickstart after closing the door.
• To terminate the interrupted program, press the button Stop
a second time.
Please note
Before beginning a different cooking process you must delete
the display and reset the system by pressing the button Stop.
To set the clock on the device, proceed as follows:

Activating setup mode
Press the button Clock.
Press the button once again to switch the oven from the 24
hour system to the 12 hour system.

Setting the hours
Turn the control dial Time/Weight until the correct hour is
displayed.
Press the Clock button to save the set hour.

Setting the minutes
Turn the control dial Time/Weight until the correct minute is
displayed.
Press the Clock button to save the set time.
67