Avoiding Radio Interference; Assembling The Accessories; Glass Turntable - Caso M20 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 144

13.5.2 Avoiding radio interference

13.6 Assembling the accessories

13.6.1 Glass turntable

caso M20
The device can cause the occurrence of interference in radios,
televisions or similar devices.
Such faults can be rectified or reduced as a result of employing
the following measures:
• Clean the door and the sealing surfaces of the device.
• Set the radio, the television, etc as far as possible away
from the device.
• Connect the device to a different electrical outlet, so that
various power circuits are used for the device and the
receiver with the interference.
• Use a properly installed antenna for the receiver, to ensure
good reception.
Assemble the glass turntable as follows:
• Insert the rolling ring
• Insert the glass turntable so the groove on the underneath
side of the glass turntable catch in the drive shaft.
58

Publicidad

Tabla de contenido
loading

Tabla de contenido