Opening / Closing Door; Activation After Selecting The Programme; Quick Start - Caso M20 Manual De Instrucciones

15.4 Opening / closing door

15.5 Activation after selecting the programme

15.6 Quick start

caso M20

Open door
Pull the door handle with a slight tug to open the door of the
device. If the device is switched on, the current cooking
programme will be interrupted.
Please note
► Leave the door open for a moment before reaching into the
cooking chamber, to allow the accumulated heat to escape.

Close doors
Close the door using the door handle until the door latch audibly
locks in place. If a current cooking programme was interrupted
as a result of opening the door, the current cooking programme
will be continued after pressing the button Start/Quickstart.
After selecting the program, press the button Start/Quickstart,
to start the preset cooking programme.
Utilise this function to programme the oven for comfortable
cooking at 100% microwave performance.
Press the Start/Quickstart button in quick sequence to set the
cooking time.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, three signal tones
will be emitted and END will appear in the display.
66