Storage Drawers; Crisper Cover; Drawer Removal - Sub-Zero Designer Serie Guía Del Usuario Y Servicios

Storage

Storage Drawers

CRISPER COVER

The crisper cover in the upper storage drawer can be slid
closed, left open, or removed.
To remove the crisper cover:
Pull the upper storage drawer all the way out.
1
2 Raise the front edge of the crisper cover and pull it
forward and out of the drawer. Refer to the illustration
below.
DRAWER DIVIDERS
To reposition a drawer divider:
To remove a short divider, flex the long divider slightly,
1
then pull upward. Refer to the illustration below.
2 For 36" wide drawer models only, one long divider is
adjustable. To remove a long divider, all short dividers
must be removed. Pull the long divider up until it stops,
rotate counterclockwise, then pull upward.
To reinstall a long divider, align the grooves with the
3
drawer tabs, rotate clockwise, then slide down.
To reinstall a short divider, position as desired, then
4
slide down.
Crisper cover Drawer dividers

DRAWER REMOVAL

To remove/reinstall a storage drawer:
To remove, pull the drawer open until it stops. Raise the
1
front of the drawer slightly and pull straight out. Refer
to the illustration below.
2 To reinstall, raise the front of drawer and place onto the
slides. Align the back of the drawer with hooks on the
slide, then align the white pegs at the front of the slide
with holes at the front of the drawer.
IMPORTANT NOTE: For drawer models, the upper drawer
has a control cable that must be disconnected before
removing the drawer. Refer to the illustration below.
Drawer removal Control cable (drawers)
subzero.com | 11