Honeywell Panel EnviraZone W8835 Manual Del Usuario página 12

Equipment Type
1 Stage Conventional
2 Stage Conventional
3 Stage conventional
Heat Pump
DIP Switch
3 Type of furnace
4 Purge time
5 Fan control during purge
6 Damper control during
purge
7 Heat pump compressor
stages
8 Fan control in heat
9 Heat pump changeover
10 Not used
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
® U.S. Registered Trademark
© 2006 Honeywell International Inc.
68-0258ES—3 M.S. Rev. 11-06
Table 5. DIP Switches 1 and 2.
Table 6. DIP Switches 3–10.
Function
Conventional/non-communicating
Two minutes
HVAC controlled
Last zone(s) calling open during purge
One stage
Fan controlled by panel in cool and
HVAC equipment in heat
O (Cool changeover)
—
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Toronto, Ontario M1V 4Z9
DIP 1
On (up)
On
Off
Off
On (Up, Default)
DIP2
On
Off (down)
On
Off
Off (Down)
EnviraCom Communicating
3.5 minutes
Panel controlled
Open all dampers during purge
Two stages
Fan controlled by panel in heat and
cool
B (heat changeover)
—