Time Zone Setting - TFA 60.2561.55 Instrucciones De Uso

TFA_No. 60.2561_Anleitung
Radio-controlled alarm clock with temperature
7.1.1 DCF reception
• By default, the DCF reception is activated (RCC ON) and after suc-
cessful reception of the DCF signal no manual adjustment is neces-
sary.
• Once the DCF time reception is deactivated (RCC OFF), the clock and
date must be manually set. No time zone will appear.
• If the DCF reception is activated, the manually set time will be over-
written by the DCF time when the signal is received successfully.

7.1.2 Time zone setting

• In the setting mode you can make the time zone correction
• The time zone correction is needed for countries where the DCF signal
can be received but the time zone is different from the DCF time (e.g.
+1=one hour plus).
7.1.3 Day-of-week language setting
• In the setting mode you can set the day-of-the week language: Ger-
man (GER), English (ENG), Dutch (DUT), French (FRE), Italian (ITA),
Spanish (ESP), Danish (DAN) and Russian (RUS). .
7.2 Year display
• Press the TIME SET button and the year appears briefly.
22
18.12.2020 12:42 Uhr Seite 12
Radio-controlled alarm clock with temperature
8. Alarm time setting
• Press the ALARM SET button in normal mode. ALM and the last
adjusted alarm time will be displayed for a short moment (default:
7:00).
• Press and hold the ALARM SET button for three seconds to enter the
setting mode.
• The hour digits flash.
• Press the UP or DOWN button to adjust the hours.
• Confirm the setting with the ALARM SET button and set minutes in
the same way.
• Press the ALARM SETbutton again to return to the current time.
• To activate the alarm function, move the ALARM ON/OFF switch to
ON.
• The alarm symbol appears on the display. The display shows the
adjusted alarm time instead of the date.
• When the alarm is activated, the alarm starts to ring when the set
alarm time is reached. The alarm symbol flashes.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• Press the SNOOZE/LIGHT button to activate the snooze function.
• The backlight turns on for a short period. The alarm will be interrupt-
ed for about 5 minutes.
• The alarm symbol flashes.
• Press any button to stop the snooze function.
• To deactivate the alarm function, slide the ALARM ON/OFF switch to
OFF. The alarm symbol disappears.
23