Engineer Code; System Overhaul; Reset Of System Overhaul; Acoustics Inhibition - Duran Electronica EUROSONDELCO Manual De Instalación

ENGINEER CODE

The "Engineer Code" is a password that restricts the access to the system programmed parameters to those people not
authorized for its programming, checking and maintenance. Default password is 66666. It is obtained by pressing five
times ENTER.
We recommend to customised this password. You will need a 5 number code bearing in mind the following table of push
buttons and numbers correspondence.
To change the code, proceed as follows:
1. Press PROGRAMMING
Insert the new code that automatically will be the new Engineer Code.

SYSTEM OVERHAUL

No System Overhaul is programmed by default. If you want to program this warning proceed as follows:
1. Press PROGRAMMING
The number of months regarding the overhaul period will be displayed -from 0 to 12-.
2. Press FORWARD to select the overhaul period -in months-.
3. Press ENTER to memorised.
Once the programmed period has ended, the message "Rev" will be displayed and an acoustic will go off. This can be
inhibited by the user.

RESET OF SYSTEM OVERHAUL

To reset from the display the System Overhaul Warning "Rev" and start a new cycle once an authorised technician has
carried out the installation checking, proceed as follows:
1. Press PROGRAMMING.
"OK" will be displayed and a confirmation acoustic will go off.

ACOUSTICS INHIBITION

This menu allows to choose if the events: Ventilation, Alarm and Saturation Levels -equipment bottom of scale- can go
off an internal acoustic. This function is specially useful when the Control Unit has been installed in a place where people
are working in order to avoid any inconvenience caused by the normal functioning of the Control Unit.
The acoustics can not be programmed independently. They all must be ACTIVATED or DEACTIVATED.
They will appear activated by default. If you want to deactivate them, proceed as follows:
1. Press PROGRAMMING
34 34
© 2012 DURAN ELECTRONICA S.L.
All rights reserved · www.duranelectronica.com
Push buttons
ON / OFF
ACOUSTIC INHIBITION
VENTILATION
PROGRAMMING
FORWARD
ENTER
Numbers
1
2
3
4
5
6