Co Detection. Portuguese-International Standard. Default Configuration; Group Number; Groups Configuration: Type Of Gas And Levels - Duran Electronica EUROSONDELCO Manual De Instalación

6. CO DETECTION. PORTUGUESE STANDARD - INTERNATIONAL. Default configuration
If you have requested EUROSONDELCO for the Carbon Monoxide (CO) detection meeting the International Portuguese
Standard regarding this gas detection, then your Control Unit will be programmed with the following parameters by
default:
Ventilation -Actuation-
1st Speed
2nd Speed
Alarm:
Number of Groups:
Cyclical Ventilation:
Activation time of cyclical ventilation:
System checking interval:
Engineer Code:
If you do not need to change any of the parameters described, it will not be necessary to enter in SYSTEM PROGRAMMING
menu, being able to enter in SYSTEM CONNECTION directly (page nº 54). If you need to change any of the parameters,
go directly to that parameter by pressing FORWARD (see quick programming for this standard in page nº 42).
To change any parameter:
1. Press PROGRAMMING
"Insert Code" will be displayed -engineer-. Default access code is 66666. It can be obtained by pressing 5
times ENTER.

GROUP NUMBER

The equipment has been programmed 2 groups by default.
1. Press FORWARD if you want to program 1 group.
2. Press ENTER to memorise.

GROUPS CONFIGURATION: Type of gas and levels

To configure the groups:
1. Press PROGRAMMING.
"Group 1" will be displayed.
2. Press FORWARD if you want to change the group.
3. Press PROGRAMMING to enter in the selected group.
The type of gas will be displayed "CO".
4. Press PROGRAMMING if you want to change the type of gas.
The different type of gases will be displayed: "CO, H
5. Press FORWARD to select the wanted type of gas.
6. Press ENTER to memorise.
The alarm level of Group 1 will be displayed "200 ppm".
7. Press PROGRAMMING if you want to change it.
The different levels will be displayed:
40 40
© 2012 DURAN ELECTRONICA S.L.
All rights reserved · www.duranelectronica.com
ON: 50 ppm -1 min input retard-
OF: < 50ppm -2 min output retard-
ON: 100 ppm -1 min input retard-
OF: < 100ppm -2 min output retard-
ON 200ppm -instant-
1
Each "0" hours
5 min
Each "0" months -without programmed checking-
66666 -5 times ENTER-
S, SO , NO, NO , CL
2 2 2 2
, HCL, O , NH EXP".
2 3,