Rotex RKHBRD011ABV1 Manual De Instalación página 82

First Second
code code Setting name
9 Automatic temperature compensation
00 Leaving water temperature compensation value
01 Domestic hot water tank compensation value
02 Thermo ON/OFF admission
A Option setup
00 Current limitation.
01 Not applicable. Do not change the default value.
02 Set point: required temperature difference for
leaving and returning water
03 Set point: multiple set point 1 required temperature
value
04 Set point: multiple set point 2 required temperature
value
b Domestic hot water set points
00 Set point: reheat minimum temperature
01 Set point: reheat maximum temperature
02 Status: weather dependent domestic water
heating
03 Set point: storage temperature
04 Automatic maximum domestic hot water storage
temperature
C Leaving water temperature limits
00 Set point: leaving water maximum temperature
01 Set point: leaving water minimum temperature
02 Not applicable. Do not change the default value.
03 Not applicable. Do not change the default value.
d Domestic water heating retention times
00 Set point: minimum time for domestic water
heating
01 Set point: maximum time for domestic water
heating
02 Set point: interval minimum stop time of domestic
water heating
E Service mode
00 Vacuum mode
01 Not applicable. Do not change the default value.
02 Not applicable. Do not change the default value.
03 Not applicable. Do not change the default value.
04 Pump only operation
Installation manual
33
Installer setting at variance with default value
Date Value Date
Default
Value value Range
0 –2~2
0 –5~5
0 –5~5
0 0~2
0 0~2
10 5~15
35 25~80
65 25~80
35 35~65
45 35~75
1 (ON) 0/1
70 45~75
70 55~75
80 37~80
25 25~37
20 18~22
5 5~18
10 5~20
30 10~60
15 5~30
0 0/1
0 (OFF) 0/1
0 (OFF) 0/1
1 0~2
0 0~2
RKHBRD011~016ABV1+Y1
Indoor unit for air to water heat pump system
4PW61218-1C – 2012.06
Step Unit
0.2 °C
0.5 °C
0.5 °C
1 —
1 —
1 °C
1 °C
1 °C
1 °C
1 °C
— —
1 °C
1 °C
1 °C
1 °C
1 °C
1 °C
1 —
5 —
5 —
— —
— —
— —
1 —
1 —