Stihl TS 460 Cutquik Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

!
Warning!
Your STIHL cut-off machine is designed
for hand-held use or operation on a cut-
off machine cart. Cutting with your cut-
off machine resting on the ground or
other surface can cause excessive wear
to the bracket designed to protect the
bottom of the tank housing. Loss of fuel
and personal injury from fire may result.
Replace damaged or badly worn
brackets immediately.
Grip: Never use the cut-off machine with
one hand. Always hold the cut-off
machine firmly with both hands when the
engine is running. Place your left hand
on front handle bar and your right hand
on rear handle and throttle trigger. Left-
handed users should follow this
instruction too.
TS 460
Wrap your fingers tightly around the
handles, keeping the handles cradled
between your thumbs and forefingers.
Make sure your cut-off machine handles
and grip are in good condition and free
of moisture, pitch, oil or grease.
!
Warning!
Clear the area where you are working.
Avoid stumbling on obstacles and watch
out for holes or ditches. Be extremely
cautious when working on slopes or
uneven ground. Take extreme care in
wet and freezing weather (rain, snow,
ice).
English / USA
!
Warning!
Never operate the cut-off machine with
the starting-throttle lock engaged as this
does not permit proper control of the
speed of the unit and may lead to
serious injury.
!
Warning!
Sparks from cutting metal
can burn or cause
clothing to catch fire. Do
not use a cut-off machine
on flammable ground.
Always direct sparks
away from the operator or any
flammable surroundings.
!
Warning!
To reduce the risk of injury from fire, do
not cut into any pipe, drum or other
container without first ensuring that it
does not contain volatile or flammable
substance.
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido