Prepare The Site - Kohler K-6228 Guía De Instalación Y Cuidado

1.

Prepare the Site

1-3/16"
(3 cm) D.
1-1/2"
(3.8 cm)
These surfaces to be
flush.
Ces surfaces doivent
être égales.
Estas superficies
deben quedar al ras.
Install Framing
NOTE: The mixer valve requires special framing and support.
Construct the framing for the faucet installation. A suggested framing example is
illustrated.
Verify the constructed framing is level and will be parallel to the finished wall.
Adjust as needed.
Attach Mixer Valve
Loosely attach the mixer valve to the framing with one or two wood screws (not
provided).
Using the flat portion of the mixer valve as a guide, level the mixer valve.
Fully tighten the wood screw(s).
Préparer le Chantier
Installer le cadrage
REMARQUE: Le mélangeur nécessite un cadrage et un support spéciaux.
Construire le cadrage pour l'installation du robinet. L'exemple de cadrage suggéré
est illustrée.
Kohler Co.
2-3/16"
(5.6 cm) D.
6" (15.2 cm)
16" (40.6 cm)
5
1-3/4"
(4.4 cm)
These surfaces to be
flush.
Ces surfaces doivent
être égales.
Estas superficies
deben quedar al ras.
1095311-2-D