Domo DO362A Manual De Instrucciones página 52

socket
n outlet
r pump
mode)
buckle
d outlet
om tray
outlet
rear
3. FAN touch
With this touch you can select the fan speed. The related indication light will turn on.
There are four settings:
· low
· medium
· high
· auto The indicator light will not illuminate in auto mode.
4."+" and "-" touch
Use these touches to select the temperature or to adjust the timer. When pressing both buttons at the
same time you can switch between "C°" or "F°".
5. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch the function will
change : AUTO – COOL – DRY – FAN. The related indication light will turn on on the control panel.
AUTO function
When the airco is in the "auto" mode, the airco will automatically make a selection between "cool" or
"fan" function, depending on the room temperature and the selected temperature.
ally)
upper air lter
The airco will automatically stabelise the room temperature on the selected temperature.
(behind the grille)
upper air intake When using the "auto" function, you can't select the fan speed.
drain outlet
air outlet
COOL function
lower air lter
The unit will cool with this setting.
lower air intake
Press the "mode" touch until the "cool" indication light turns on.
power plug socket
Use the arrow touches to select the desired room temperature.
drain outlet
(only for pump
heating mode)
Use the "fan" touch to select the desired air speed.
power cord buckle
power cord outlet
bottom tray
drain outlet
DRY function
This function is used to dehumidify the air.
Press the "mode" touch unit the "dry" indication light turns on.
With the selection you can't select te temperature or fan speed.
Keep windows and doors closed for an optimal dehumidification.
It is not necessary to install the air outlet hose with this function.
Connect the drainage tube to the permanent drainage. See 'Cleaning and maintenance > drainage'.
FAN function
This function allows you to use the unit as a fan.
Press the "mode" touch until the fan indication light will turn on.
Press the "fan" touch to select the air speed.
The temperature can't be selected.
You don't need to attache the air outlet hose.
6. TIMER touch
With this function you can select when the unit must turn on or off.
When the unit is on, you press the "timer" touch. The "timer off" indication light will turn on. This
indicates that the "auto shut off" is activated. When pressing het "timer" touch again, the "timer on"
indication light will turn on. This indicates that the "auto on" function is activated.
52
DO362A
rear