Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
drain outlet
rear
Press the "+" and "-" buttons to select the time. The max time selection is 24 hours.
After finishing the selection, the time will start to countdown on the display until "auto on" or "auto off",
depending on the selection you made.
You can cancel the timer function at any time by pressing the "on/off" touch.
When the error code E1 or E2 is displayed, the timer selection will be canceled.
7. SWING touch
To adjust the air direction.
8. LED display
Will show het temperature and timer selections. When the "dry or "fan" mode is selected, the display will
show the room temperature.

REMOTE CONTROL

·
The remote control will only function within 8 m of the airco. Point the remote in the direction of the
airco. The transmission will be confirmed with a beep signal.
·
The airco will not react to the remote if the signal is blocked by curtains, doors or
other materials.
·
Make sure the remote doesn't get wet. Don't expose the remote to direct sunlight
or heat.
·
When the infrared sensor on the appliance is positioned in direct sunlight it is
possible that it won't react to the remote control. Make sure there is no direct
sunlight on the infrared sensor.
·
When other electrical appliances are reacting to the remote control, remove them
further away from the airco or contact your supplier.
·
Don't use old and new batteries at the same time in the remote control. Don't use
two different types of batteries in the remote control.
·
Remove the batteries from the remote, when you won't use it for a longer periode
of time. (more than two months)
·
Recycle used batteries correctly.
Batteries
·
The remote control works with 2 AAA batteries.
·
Remove the cover of the batterie compartment, by pressing down on it and sliding
it out of the remote.
·
Place the batteries, make sure to follow the indications + and – indicated in the
ON/OFF
batterie compartment.
MODE
·
Place the cover back on the batterie compartment.
TEMP
FAN
·
NOTE : When removing the batteries all selections will be deleted. When placing
new batteries you have to reinstall all the selections.
SLEEP
SWING
Functions
ON/OFF
ON/OFF BUTTON
To turn the unit on or off. The
ON/OFF
SHORT
CUT
MODE
TIMER
ON
TEMP
TIMER
FAN
OFF
www.domo-elektro.be
SLEEP
SWING
LED
SHORT
CUT
TIMER
ON
TIMER
OFF
LED
symbol appears on the display
ON/OFF
SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP
SWING
LED
53
DO362A

Publicidad

Tabla de contenido
loading

Tabla de contenido