About Bluetooth Capabilities - Bose WIRELESS COMPUTER SPEAKER Guía De Usuario

TAB 8, 16 TAB 7, 15
S S
YSTEM ETUP
Pairing with a Bluetooth
1. Disconnect USB key
Remove the USB key from your computer.
2. Make the wireless speaker Discoverable
Press and hold the wireless source button on
the remote (hold for at least 3 seconds).
The wireless source light on the speaker will
flash slowly, indicating that the system is in
discoverable mode.
3. Select Bose SoundLink from Device List
Look for "Bose SoundLink Audio" in the list of
available devices on your Bluetooth device.
4. Enter Passcode
If your device requests a pass code in order to
complete the pairing, enter "0000."
5. Complete Pairing
Listen for an audible "up" tone from the wireless
speaker, indicating that the pairing was successful.
10
TAB 6, 14 TAB 5, 13
device
®
TAB 4, 12 TAB 3, 11

About Bluetooth capabilities

The wireless capability of the Bose
speaker is based on Bluetooth wireless technology. This
means that the speaker can be paired with third-party
Bluetooth devices such as stereo Bluetooth mobile
phones that support the Advanced Audio Distribution
Profile (A2DP).
Because implementation of this wireless technology
differs, specific device compatibility, audio quality, as
well as wireless range and performance may vary. For
most devices, maximum wireless range will be around
30 ft.
Note:
The computer will remain in the SoundLink
will automatically reconnect if you plug in the USB key and then
power on the wireless computer speaker. For information on how
to manually pair the USB key back to the speaker, see "Restoring
the wireless link" on page 20.
TAB 2, 10 English
® wireless computer
®
memory and