Packagecontents - Kobalt KMS 0724B-03 Manual De Instrucciones

PACKAGECONTENTS

Unpacking
• Carefully lift the miter saw from the carton and place it on a level worksurface.
NOTICE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help
when needed.
• Use the main handler to lift the saw arm; do not lift the saw by the saw arm.
• This saw has been shipped with the saw arm secured in the "DOWN" position. To release
the saw arm, push down on the top of the saw arm, and pull out the arm-lockpin.
• Carefully inspect the item to ensure that no breakage or damage has occurred during
shipping. Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool
• The saw is factory set for accurate cutting. After assembly, check for accuracy as directed
in the Adjustments Instructions section of this manual. If shipping has influenced the
settings, refer to specific adjustment procedures explained in this manual.
• If any parts are damaged or missing, please call customer service at 1-888-3 KOBALT for
assistance.
WARNING
• If any parts are missing, DO NOT attempt to assemble, install, or use the miter saw until
the missing parts have been found or replaced and the miter saw has been properly and
correctly assembled according to this manual.
A
PART DESCRIPTION
1 Miter saw
2 Work clamp
3 Dust bag
Double ended blade wrench
4
(stored in the saw)
B
1
C
4
E
2
D
5
PART DESCRIPTION
5 Carrying handle
6 Long screw, spring washer, flat washer
7 Short screw, spring ser, flat washer (2)
3
3
F
6 7