Connecting The Tubing - Pari LC SPRINT SINUS Manual De Instrucciones

of the bottom, please empty and clean (see Chapter 6 "Hygienic re-use").
Then fill the nebuliser with the medication again.
• Close the cap on the nebuliser upper section (1a) by clicking it into place.

4.3 Connecting the tubing

• Hold the nebuliser upright.
• Insert the bolus tube (6) into the vibration connection (7).
• Connect the bolus tube with the vibration connection at the top of the neb-
uliser upper section.
• Only then connect the pressure hose (2) to the bottom of the nebuliser
lower section (1c).
To set down, insert the nebuliser into the nebuliser holder provided for this
purpose on the compressor.
24