Check List; Cleaning Accessories - EdilKamin CALGARY Instalación Uso Y Mantenimiento

To be integrated with a complete reading of the technical specifi cations
Positioning and installation
• Room ventilation
• Only the thermo-stoves outlet passes through the smoke channel/chimney fl ue
• The smoke channel has: a maximum of 2 curves
• The exhaust pipes are made of suitable material (recommended: stainless steel)
• When using any fl ammable materials (e.g. wood), all precautions have been taken to prevent a fi re hazard
• The heating capacity has been appropriately assessed considering radiator effi ciency:
how many kW have been estimated to be necessary???
• The hydraulic system has been declared to be compliant with the Ministerial Decree 37 ex Law No. 46/90 by a qualifi ed
technician.
Use
• Good quality, dry wood pellets are used (diameter 6 mm) (maximum permissible humidity 8%).
• The chimney pot and ash compartment are clean and well positioned.
• The cleaning rods are moved every day.
• The exchanger tubes and internal parts of the hearth are clean.
• The smoke extract duct is clean.
• The bleeding process has been applied to the hydraulic system.
• The pressure (read on manometer) is approx. 1 bar.
REMEMBER TO VACUUM THE COMBUSTION CHAMBER BEFORE EACH IGNITION
Should ignition fail, DO NOT re-ignite until you have emptied the combustion chamber.

CHECK LIST

a maximum of 2 horizontal metres

CLEANING ACCESSORIES

Ash vacuum cleaner
without motor
(code 275400)
Used for cleaning
the hearth
- 45
-