Cleaning And Maintenance - HEBU medical HB 8888-01 Instrucciones Para El Uso Y El Servicio

HEBU Dust extractor Set

5 Cleaning and maintenance

Before performing any cleaning or maintenance work, disconnect
!
the mains plug.
Repairs may only be performed by approved customer service
centres or by specialist personnel who are familiar with all relevant
!
safety regulations.
Ensure that all safety checks stipulated by the relevant locally
!
applicable regulations for mobile commercially used devices are
observed.
!
Bajonett fitting between dust removal unit and vacuum tube must be
grease with HEBU special lubrication grease.
!
The bajonett fitting should be spaced to get cleaned and greased.
The o-ring should be spaced to be under examination to form
!
cracks and deformation.
➢ Exchange the motor protection filter every three months (otherwise suction loss or
damage to the suction turbine can occur.
➢ Exchange the exhaust filter once a year.
➢ As cleaning agent, we recommend products with a pH value between 9 and 10, e.g.
MediClean forte by Dr. Weigert.
17
Always at the
change from the
saw blade, apply
!
both wrenches
Socket wrench to
attract and open-
ended wrench to
secure the screw!
!
EN