System Maintenance Work; Cleaning; Fuses; Transport - HEBU medical HRF 100 x-touch Instrucciones Para El Uso

HBS x-touch 200i
11

System maintenance work

11.1 Cleaning

!
Follow the local hygiene instructions.
• Clean all surfaces of the device (including the front) with cleaning agents and disinfectants without
alcohol.
• Follow the manufacturer's instructions for the disinfectants.
• Wipe off the agent with a sponge or cloth dampened in clean water.
• Dry the device with a clean, lint-free cloth.
• Do not clean or disinfect surfaces with flammable or explosive products. If their use cannot be
avoided, flammable or explosive products must be completely vaporized before switching on the
device.
• Propanol and ethanol attack surfaces.
• Do not immerse the device in liquid.
• Do not sterilize the device with steam, ethyloxide or other agents

11.2 Fuses

The fuse sockets are located on the back of the unit. The unit works with two fuses of 6.3 A each.
Exchanging the fuses:
◼
Disconnect the unit from the mains
◼
Release the fuse from the retainer using a flat blade screwdriver
◼
Exchange the fuse
After an exchange of fuses, the unit must be checked by suitably qualified personnel.

11.3 Transport

Prevent mechanical damage and moisture.
If the unit has been stored for a long period in a cold environment, wait before removing the protective
packaging until the unit has reached room temperature.
During transportation, the standard safety measures additionally apply.
Only ever transport the unit in its original packaging.
When cleaning the device:
Always disconnect the device from the mains before cleaning.
Before connecting the device to the mains, make sure that all
flammable cleaning agents have completely evaporated.
EN
59