Internal Lining - SCHUBERTH SR 1 Manual De Instrucciones

C. THE HELMET

12. INTERNAL LINING

The washable, replaceable internal lining of the SR1 offers not only
a superb shape but also improved entry and exit of air to and from
the helmet.
The cheek comfort padding and ear pads provide soft cushioning
to the cheeks and the headband cushion offers good positioning
around the head. The central head pad ensures comfortable fi tting
to the head while ensuring that the air channels do not become
blocked (see Ventilation systems/Head ventilation, section C.13).
The internal lining consists of skin-friendly materials throughout,
particularly in areas that come in contact with the head. These
®
are a soft, breathable COOLMAX
moisture very well, a special noise-reducing Polygene
with antibacterial properties and a sweat-absorbing Interpower
material.
REMOVING THE INTERNAL LINING
The internal lining is fi xed to the inner shell of the helmet by
means of a clamp fastening. It can be removed by pulling it gently
out.
Removing the cheek comfort pads
1. Loosen the pins stitched into the
cheek pads from the red-marked
insertion points on the inner shell.
64
material that transports heat and
®
material
®
2. Gently pull the cheek pad away
from its fi xing.
3. Repeat process for the other
cheek pad.
Removing the headband cushion
1. Pull the semicircular guide rail of
the headband cushion out of the
slots of the plastic rail fi xed to the
inner shell.
2. Pull the retaining strap in the neck
area out of the guide slot between
the inner and outer shells.
65