Basic Operation
4
On/Off
Characteristic of Dry mode
The Dry mode dehumidifi es the space at reduced cooling capacity to
prevent the room temperature from dropping to an uncomfortable
level.
Setback
The Setback function can be used to maintain the space temperature in an assigned range for an
unoccupied period.
Note
●
When enabled, the Setback mode becomes active when the indoor unit is turned off by either
the user, a schedule event or an off timer.
●
This function is not available by default. It can be enabled by the system installer.
14
●
When
On/Off button is pressed again,
the system will stop operating and the
Operation lamp will turn off.
Note
●
To prevent condensation water damage or system failure, do not
shut off the power supply to the indoor unit immediately after
operation. Wait at least fi ve minutes for the condensate pump to
fi nish draining residual water from the indoor unit.
English