Setting The Cool / Heat Changeover Master - Daikin BRC1E73 Manual De Operación

Basic Operation
4
On/Off
5
On/Off

Setting the Cool / Heat Changeover Master

Setting Changes
1
Cool
Set to
74
Return Setting
MASTER
CONTROLLED
Cool
Set to
74
Return Setting
16
● Press On/Off button.
The Operation lamp will illuminate solid
green and the system will start
operating.
● When On/Off button is pressed again,
the system will stop operating and the
Operation lamp will turn off.
See page 18 for an explanation of the cool/heat changeover master indoor unit.
● Press Mode button on the remote
controller of the changeover master
indoor unit for at least four seconds
F
while the backlight is illuminated.
● The "
MASTER
CONTROLLED
indoor units connected to the same outdoor unit or
Branch Selector unit will start fl ashing.
F
* Vent mode setting changes are possible regardless of the cool/
heat changeover master indoor unit.
* If the outdoor unit is confi gured as cool/heat changeover master,
all remote controllers serving the associated indoor units will
display its "
CONTROLLED
● Set the cool/heat changeover master indoor unit as
outlined below.
" icon on each remote controller for the
" icon.
MASTER
(VRV only)
English