Quick Reference
The main menu has the following items.
Menu item
Airfl ow Direction
Louver Setting
Individual
Airfl ow
Direction
Louver Setting List
(depends on
indoor unit model)
Reset All Louvers
Position
Ventilation
Ventilation Rate
Ventilation
operation settings
for energy
Ventilation Mode
recovery ventilator
Schedule
Daily Patterns
Settings
Off Timer
Celsius / Fahrenheit
20
Description
Used to confi gure airfl ow direction
settings.
●
The airfl ow direction louver is automatically
operated up and down (left and right).
●
The fi xed airfl ow directions are confi gurable
for fi ve positions.
*
This function is not available on all indoor unit
models.
Set the airfl ow direction individually for each
of the 4 louvers.
●
Maximum 16 units (unit 0 till 15).
Setting table for louver.
Reset all louvers to factory default setting.
Used to set "Low" or "High"
Used to set Auto, ERV, or Bypass.
●
Day settings are selected from four patterns, i.e.,
"7Days", "Weekday/Weekend",
"Weekday/Sat/Sun", and "Everyday".
●
Set the startup time and operation stop time.
ON:
Startup time, cooling and heating
temperature setpoints can be
confi gured.
OFF: Operation stop time, cooling and
heating setback temperature
setpoints can be confi gured.
( --: Indicates that the setback
function is disabled for this time
period. )
_:
Indicates that the temperature
setpoint and setback temperature
setpoint for this time period is not
specifi ed. The last active setpoint will
be utilized.
●
Up to fi ve actions can be set for each day.
Used to set the run-time for the indoor unit
using this controller.
●
Possible to set in 10 minute increments from
30 to 180 minutes.
●
Used to select whether temperature values
will be displayed in Celsius or Fahrenheit.
Reference page
23
25
26
27
28
29
31
32
35
–
English