Dry Mode - Daikin BRC1E73 Manual De Operación

Dry Mode

Preparation
● For equipment protection purposes, apply power to the outdoor units at least six hours before
starting the operation of the system.
● The dry mode may not be selected if the remote controller is master controlled and the
system is not already in the cooling mode of operation. (see page 18 for details)
Operation
1
Dry
Return Setting
2
On/Off
3
English
● Press Mode button several times until
the Dry mode is selected.
* The dry mode may not be available depending on the type of
indoor unit.
● Press On/Off button.
The Operation lamp will illuminate solid
green and the system will start
operating.
* In Dry mode, the system maintains automatic temperature and
fan speed control. Therefore, temperature setpoint or fan speed
settings are not available while the indoor unit is in the Dry
mode.
● Adjust Airfl ow Direction from the main menu
.
(see page 23)
* If the connected indoor unit does not have oscillating louvers,
this function will not be available.
13