Aventics ED12 Instrucciones De Servicio página 41

AVENTICS | ED12 | R414002587–BDL–001–AB 41
For your safety
During commissioning Before commissioning, make sure that all the connection seals
and plugs are leaktight to prevent fluids and foreign bodies
from penetrating the device or plug connections and
destroying the electronics.
Ensure that the six mounting screws have been tightened with
the correct torque. Never loosen the six mounting screws on
the device cover.
During operation Other system parts may be damaged by uncontrolled device
movements if it has not been properly mounted. Make sure
that the device is attached to a base plate that is securely
fastened to the machine or a mounting plate.
Touching the valve coils during operating may lead to burns.
Let the device cool off before disassembling. Do not touch the
device during operation.
If the housing ventilation port is closed, there is no
atmospheric equalization and the characteristics curve will
change. Ensure that the air can circulate freely through the
housing ventilation port. Never operate the device in an
atmosphere containing oil.
During cleaning Never use solvents or aggressive detergents. Only clean the
device using a slightly damp cloth. Only use water to do this
and, if necessary, a mild detergent.
Disposal Dispose of the device in accordance with the currently
applicable regulations in your country.