Intended Use; Improper Use; Personnel Qualifications - Aventics ED12 Instrucciones De Servicio

38 AVENTICS | ED12 | R414002587–BDL–001–AB
For your safety
Keep these instructions in a location where they are accessible
to all users at all times.
Always include the operating instructions when you pass the
ED12 on to third parties.
2.1

Intended use

The ED12 is a pneumatic device with integrated electronics that is
only designed to regulate pneumatic pressures.
Air that is dry and free of condensate is the permissible media.
Operation with pure oxygen is not permitted.
The ED12 is for industrial applications only.
An individual license must be obtained from the authorities or
an inspection center if the ED12 is to be used in a residential
area (residential, business, and commercial areas). In
Germany, these individual licenses are issued by the
Regulating Agency for Telecommunications.
Observe the performance limits listed in the technical data.
Only use the ED12 inside.
Intended use includes having read and understood these
instructions, especially the chapter "2 For your safety".
2.2

Improper use

It is considered improper use when the ED12
is used for any application not named in these instructions,
is used under operating conditions that deviate from those
described in these instructions.
2.3

Personnel qualifications

Assembly and commissioning require basic electrical and
pneumatic knowledge, as well as knowledge of the appropriate
technical terms. Assembly and commissioning may therefore only
be carried out by qualified electrical or pneumatic personnel or an
instructed person under the direction and supervision of qualified
personnel. Qualified personnel are those who can recognize