Safety-Related Information; Conventions In This Document; Meaning Of The Warning Notices; Typographical Conventions - Dräger X-pid 9000 Instrucciones De Uso

Safety-related information

1 Safety-related information
– Before using this product, carefully read these instructions for use and those
of the associated products.
– Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the Intended use section of this document.
– Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product (e.g. IEC 60079-14).
– Only trained and competent personnel are permitted to inspect, repair and
service the product as detailed in these Instructions for Use (see chapter 5).
Further maintenance work that is not detailed in these Instructions for Use
must only be carried out by Dräger or personnel qualified by Dräger.
Dräger recommends a Dräger service contract for all maintenance activities.
– Only use genuine Dräger spare parts and accessories when performing
maintenance work, or the proper functioning of the product may be
impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any component fault or failure.
– Substitution of components may impair the intrinsic safety of the product.
– Electrical pairing with devices which are not listed in these instructions for
use should only be done following consultation with the respective
manufacturers or an expert.
Use in areas subject to explosion hazards
Devices or components for use in explosion-hazard areas which have been
tested and approved according to national, European or international explosion
protection regulations may only be used under the conditions specified in the
approval and with consideration of the relevant legal regulations. The devices or
components may not be modified in any manner. The use of faulty or
incomplete parts is forbidden. The appropriate regulations must be observed at
all times when carrying out repairs on these devices or components.
2

Conventions in this document

2.1

Meaning of the warning notices

The following warning notices are used in this document to alert the user to
potential hazards. The meanings of the warning notices are defined as follows:
Warning sign Signal word
WARNING
CAUTION
NOTICE
2.2

Typographical conventions

Text Text in bold identifies labels on the device, and screen texts.
► This triangular symbol in warning notices identifies the options
for avoiding the hazard.
This symbol identifies information that makes the product easier
to use.
2.3 Trade marks
Trade mark Trade mark holder
bentekk GmbH | A Dräger Company
®
X-pid
Bluetooth SIG, Inc.
®
Bluetooth
Dräger X-pid
Classification of the warning notice
Indicates a potentially dangerous situa-
tion. Non-observance can result in seri-
ous injury or death.
Indicates a potentially dangerous situa-
tion. Non-observance can lead to physi-
cal injury. Can also be used to warn
against unsafe practices.
Indicates a potentially dangerous situa-
tion. Non-observance can lead to prod-
uct and environmental damage.
®
9000/9500 Sensor Unit