Transport And Storage; Delivery; Transport - Wilo HC 20.1+EMU FA Instrucciones De Instalación Y Funcionamiento

5

Transport and storage

5.1

Delivery

5.2

Transport

Installation and operating instructions Wilo Motor HC 20.1 + EMU FA, Rexa SUPRA, Rexa SOLID
Transport and storage
▪ Pump foot
▪ Special versions with Ceram coatings or special materials
▪ External pencil electrode for sealing chamber control
▪ Level controls
▪ Fixing accessories and chains
▪ Switchgears, relays, and plugs
Following receipt of the shipment the shipment must be immediately checked for defects
(damage, completeness). Any existing defects must be noted on the freight documentation!
Furthermore, the defects must be reported to the transport company or manufacturer on
the date of receipt. Claims reported after this date can no longer be invoked.
WARNING
Standing under suspended loads!
People must not stand under suspended loads! There is a risk of (serious) injury due to
falling parts. The load must not be moved over the work areas in which people are
present!
WARNING
Head and foot injuries due to a lack of protective equipment!
During work there is a risk of (serious) injury. Wear the following protective equipment:
• Safety shoes
• If lifting equipment is used, a protective helmet must also be worn.
NOTICE
Use only technically faultless lifting equipment!
Use only technically faultless lifting equipment to lift and lower the pump. Make sure
that the pump does not jam during lifting and lowering. Do not exceed the maximum
bearing capacity of the lifting equipment! Check that lifting equipment is functioning
properly before use!
To protect the pump from damage during transport, only remove the outer packaging at the
operation site. Pack used pumps for shipping in tear-proof plastic bags of sufficient size so
that they are leakproof.
Furthermore, observe the following points:
en-US
17