Ingeteam INGECON SUN 40TL U M480 Manual De Instalacion Y Uso página 25

Installing the unit
5. Mark the bottom fixing points, take down the inverter and drill said holes. Suspend the inverter from
the attachment plate again and screw in the two bottom attachments. The diameter of the holes
are 0.35 in (9 mm).
6. If you want to install a chain.
Exterior view of the unit
7. Check that the unit properly secured.
Once the unit has been installed correctly, the connection process will begin.
Make the connections in the following order:
1. Connection of accessories (optional).
2. AC connection.
3. DC connection.
ABO2012IQM01_ - Installation and Operation Manual
Interior view of the unit
Ingeteam
EN
ES
25