Installation, use and maintenance manual
8.5
Emptying the boiler
If the boiler is not used, especially in low
temperatures, it is good practice to empty the
water inside the boiler.
To do this, simply disconnect the water inlet
connector (see section 5).
NOTE: remember to empty the system
when temperatures are low to prevent
freezing.
If the appliance is not used for long
periods, in addition to emptying the boiler,
the
electrical
disconnected, as the appliance has an
anti-freeze function which may otherwise
be activated needlessly, even where
there is no water in the tank.
plug
should
also
be
MANUAL CODE: 6328406
Page 57 / 124