Cleaning And Maintenance - UFESA PN5000 Manual De Instrucciones

FUNCTION
precalentar
(preheat)
amasar 1 (knead 1) 5 m
reposo (rest) 5 m
amasar 2 (knead 2)
20 m
fermentar 1 (rise 1) 39 m
amasar 3
10 s
(knead 3)
fermentar 2
26 m
(rise 2)
amasar 4
(knead 4)
fermentar 3
52 m
(rise 3)
cocer (bake) 50 m
templar (warm)
total time 3:17
*
– Automatic dispenser for loose ingredients is available as an option.

Cleaning and maintenance

● Before using the device for the first time, clean the
baking container, the molds, and the stirring spatula
by means of a gentle detergent (do not immerse the
baking container in water).
● Before using the device for the first time, grease
the new baking container, the molds, and the stirring
spatula with a heat-resistant grease, and preheat them
in the oven for ca. 10 minutes. After cooling down,
remove the fat from the baking tin using a paper towel.
Thanks to this operation, the non-stick coating will be
protected. Repeat this operation from time to time.
● Before storing or cleaning wait to cool down the
bread maker. It takes about half an hour for the
appliance to cool and to be ready again for baking and
kneading.
● Unplug the appliance and wait until it cools down
before cleaning. Use a mild detergent. Never use
chemical cleaning agents, gasoline, oven cleaners or
any detergent that can scratch or damage the coating.
4
5 m 5 m
5 m 5 m
20 m 20 m
39 m 39 m
10 s 10 s
26 m 26 m
5 s 5 s 5 s
52 m 52 m
55 m 60 m
1 h 1 h 1 h
3:22 3:27
5 6 7
5 m 5 m 5 m
0 m 5 m
15 m 10 m 20 m
12 m 0 m 60 m
0
0
0
60 m 0 m
48 m 55 m 0 m
1 h 1 h -
1:20 2:10 1:30
● Remove all the ingredients and crumbs from the lid,
casing and baking compartment with a moist towel.
Never immerse the appliance into water or fill the
baking compartment with water!
● For easy cleaning the lid can be removed by
positioning it vertically and pulling it out.
● Wipe the outside of the baking tin with a damp cloth.
The inside of the tin can be washed with dishwashing
liquid. Do not immerse the tin into water.
● Clean the kneading pegs and the drive shaft
immediately after use. If the kneading pegs remain in
the tin, it will be difficult to remove them afterwards.
In such a case fill the container with warm water and
leave for 30 minutes. Next remove the kneading pegs.
● The baking tin has a non-stick coating. Do not use
metal objects that could scratch the coating. The color
of the coating will change during the course of use.
This is a normal situation. This change does not affect
the effectiveness of the coating in any way.
● Make sure the appliance has completely cooled
down and is dry before storing. Store the appliance
with the lid closed.
8 9 10
0 m
3 m 5 m
0 m
11 m 10 m
0 m
0 s
0
0 s
0
60-90
70 m
m
- 1 h
0:14 1:25 1:00
11
baguette*
5 m 5 m 5 m
0m 0 m 0m
20 m 20 m 20 m
55 m 55 m 55 m
0 s 0 s 0 s
0 m 0 m 0 m
0 s 0 s 0 s
15 m 15 m 15 m
52 m 57 m 62 m
1 h 1h 1 h
2:27 2:32 2:37