Chain; Check And Adjust Tightening Chain - Beta Motorcycles ALP 200 2019 Manual De Instrucciones

CHAIN

Checking the drive chain periodically to
ensure longer chain life.
Always keep it lubricated and clean of
deposited dirt.
If play exceeds 20 mm adjust the chain.
Take special care in preventing the lubri-
cant from coming into contact with the
rear tyre or brake disc, otherwise the tyre
grip and the action of the brake would be
greatly reduced, making it very difficult to
control the vehicle.
CHECK AND ADJUST
TIGHTENING CHAIN
Position the vehicle on a flat base ensuring
stability.
If the chain play exceeds 20 mm, tension
the chain by following these steps:
Loosen the pin 1
-
Loosen the counternut 2
-
- Adjust by turning screw 3
- Use the same procedure on the other
side.
- Check wheel alignment.
- Check the tension of the chain.
- If chain clearance is not as expected,
proceed to readjustment.
- Tighten the pin to the torque indicated.
- Retighten counternut 2.
20 mm
2
51
1
3
80Nm
4
EN