Checks Before And After Use; Breaking In - Beta Motorcycles ALP 200 2019 Manual De Instrucciones

2

CHECKS BEFORE AND AFTER USE

For safe driving and long vehicle life you should:
1 Check all fluid levels.
2 Check the correct operation of the brakes and brake pad wear
3 Check pressure, general condition and thickness of tread
4 Check that the spokes are properly tightened.
5 Check the tensioning of the chain
6 Check the adjustment and the operation of all the cable controls.
7 Inspect all the nuts and bolts.
8 With the engine running, check the operation of the headlight, the rear and
brake lights, the indicators, the warning lights and the horn.
9 Wash the motorcycle thoroughly after off-road use

BREAKING IN

Breaking in takes approximately 1000 km/350 miles.
During this time:
• Avoid travelling at constant speed.
• Avoid turning the throttle more than 3/4 of the way.
WARNING:
After 1000km change the oil and perform all the checks detailed on page 59.
EN
(page 51).
(page 57).
30
(page 44).
(page 10).