Introduction; Intended Use; Features And Fittings; Included Items - Parkside PDT 40 B2 Instrucciones De Utilización Y De Seguridad

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Wear hearing protection
and protective glasses.
Keep children away from electrical
devices!
Pneumatic stapler PDT 40 B2
Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The operating instructions
are part of the product. They contain important in-
formation concerning safety, use and disposal. Be-
fore using the product, familiarise yourself with all
of the operating instructions and safety instructions.
Use the product only as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.

Intended use

The device is suitable for assembly and repair work.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable dangers. We will not accept liability
for loss or damage arising from improper use. The
device is intended for private domestic use only.

Features and fittings

Exhaust air aperture (can be rotated)
1
Trigger
2
Handle
3
30 GB/MT
Do not use the device on scaffolds
or ladders.
Never use hydrogen, oxygen, carbon
dioxide or other bottled gases as an
energy source.
Trigger lock
Dispose of packaging and
device in an environmentally-friendly
way!
Threaded nipple 6.35 mm (¼")
4
Magazine
5
Fill level indicator
6
Knurled screw
7
Trigger lock
8
Mouth
9
Face plate
10
Face plate quick clamp lever
11
Magazine lever
12

Included items

1 Pneumatic stapler PDT 40 B2
1 Carrying case
1 Special compressed air oil
1 Threaded nipple 6.35 mm (¼") (pre-assembled)
1 Package nails, 1000 pcs.
1 Package staples, 1000 pcs.
1 Protective glasses
1 Operating instructions

Technical data

Dimensions:
Weight
(without fasteners):
Trigger type:
Maximum permissible
pressure:
248 x 58 x 246 mm
(L x H x W)
1.513 kg
Compressed air
8 bar