D-Fi™ 2.4 Ghz (Dmx Mode Manual Sync) - Chauvet FREEDOM PAR Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

D-Fi™ 2.4 Ghz
(DMX Mode
Manual Sync)
Page 20 of 76
The Freedom™ PAR and Stip Mini offer wireless control of 2 or more products with a
single DMX controller. To manually set up the D-Fi™ 2.4 GHz syncing for DMX, do the
following:
For the transmitting product:
1.
Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2.
Use <UP> or <DOWN> to select SYS.
Press <ENTER>.
3.
4.
Press <UP> or <DOWN> until S-tr appears on the display.
5.
Press <ENTER>.
6.
Press <UP> or <DOWN> until dt.CH appears on the display.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to select the transmitting signal (dt.01-dt.16).
For the receiving product(s):
1.
Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2.
Use <UP> or <DOWN> to select SYS.
3.
Press <ENTER>.
Press <UP> or <DOWN> until S-tr appears on the display.
4.
5.
Press <ENTER>.
6.
Press <UP> or <DOWN> until dR.CH appears on the display.
7.
Press <ENTER>.
Use <UP> or <DOWN> to select the receiving signal (dr.01–dr.16). The channel
8.
number should match the transmitting signal you chose in the prior steps.
Once the steps above are done, you can then back out to a more general menu level
and configure the transmitting product to operate it with a DMX controller.
To configure your product to work with DMX, refer to the
If you are experiencing antenna issues or need to improve signal quality, extend the
antenna outward away from the product and keep the line of sight between products
unobstructed.
Ensure that all linked products are configured to the same DMX personality (either
3-channel or 4-channel).
To sync multiple transmitters in one room, manually set each receiver and the
designated transmitter to a specific frequency and then perform the syncing
steps.
The Freedom™ PAR and Strip Mini are fully compatible with the D-Fi™ 2.4 GHz
wireless transceiver (transmitter/receiver) from CHAUVET® (sold separately).
For more detailed information about D-Fi™ 2.4 GHz functionality, refer to the D-Fi™ 2.4
GHz User Manual available at the CHAUVET® website:
Starting Address
www.chauvetlighting.com.
Freedom™ PAR/Strip Mini User Manual (Rev. 8 ML)
section.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Freedom strip mini

Tabla de contenido