Configuration (Standalone); Automatic Mode; Auto Programs; Irc (Infrared Remote Control) - Chauvet FREEDOM PAR Manual De Instrucciones

Configuration
(Standalone)

Automatic Mode

Auto Programs

IRC (Infrared
Remote Control)
Freedom™ PAR/Strip Mini User Manual (Rev. 8 ML)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To enable the Automatic mode, do the following:
1. Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2. Use <UP> or <DOWN> to select ACt.
Press <ENTER>.
3.
4. Use <UP> or <DOWN> to choose your desired program (A000–A023).
Press <ENTER>.
5.
Certain programs will have additional functionality. To find these options, press
<ENTER> after selecting an auto program. Then press <UP> or <DOWN>. Not every
program will feature all the added functionality.
Function
F000–F100
SL.00–SL.32
P000–P100
C000–C100
Program Function
A000 No function
A001 Red
A002 Green
A003 Blue
A004 Red + Green
A005 Red + Blue
A006 Blue + Green
A007 Red + Green + Blue
A008 Color Change 1
A009 Color Change 2
A010 Quadrant Effect 1
A011 Quadrant Effect 2
A012 Quadrant Effect 3
A013 Quadrant Effect 4
A014 Quadrant Effect 5
A015 Quadrant Effect 6
A016 Quadrant Effect 7
A017 Quadrant Effect 8
A018 Color Change 3
A019 Color Change 4
A020 Color Change 5
A021 RGB Full On
A022 Color Fade
A023 Sound-Active
The Freedom™ PAR and Strip Mini are fully compatible with the IRC (Infrared Remote
Control) from CHAUVET® (sold separately).
To set up the IRC to operate with the Freedom™ PAR or Strip Mini, do the following:
1. Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2. Use <UP> or <DOWN> to select S-1r.
3. Press <ENTER>.
4. Begin using the IRC.
Description
Flash speed (slow to fast)
Sound sensitivity (Automatic Mode)
Run speed (slow to fast)
Dimmer (brightness increasing)
In this channel:
P – Red
F – Green
C – Blue
Page 17 of 76